Typical physical and chemical parameters： 

Application:

Ink, varnish, automobile paint, waterborne coatings. Such as industrial paint, wood coatings, plastic coatings, decorative coatings, architectural coatings, leather and polyurethane.

Usage and dosage:

In order to achieve the best results, please test the most suitable amount before use. General amount is 0.1 - 1% of paint by weight.

Features:

1. It can applicate in low surface energy surface, such as almost all kinds of the metal, plastics, with very low dynamic surface tension.

2. It will not affect the gloss of film, so that it can be used in high gloss paint.

3. It shows good compatibility with coatings, while promote the flow and leveling, can effectively prevent the defect such as cratering, orange skin, needle or other defects.

4. It can shows lower foam stability compared with the traditional wetting agent.

5. It will not affect the adhesion between the coating layers.

Storage:

Stored in unopened package at room temperature in a dry, ventilated place.

            Samples                                                              20/25/30kgs                                        180/200/230kgs

  Packing: drums with palletized and shrink wrapped on pallets.