Typical physical and chemical parameters： 

Application:

Waterborne industrial coatings, waterborne wood coatings, waterborne automotive coatings, waterborne wood coatings, waterborne plastic coatings, waterborne paste.

Usage and dosage:

Can be used directly or after diluted by solution. Should be fully stirred to make sure it is evenly dispersed.

In order to achieve the best results, please test the most suitable amount before use. General amount is 0.1 - 1% of paint by weight.

Features:

1. With extremely low surface tension, it can effectively promote the coating spreading on the substrate surface, wetting and flow, even on low surface energy substrates. Especially it can improve the wettability of coating even on very low energy or contaminated surfaces.

2. It shows good compatibility with coatings, can effectively prevent the defect, such as cratering, orange skin, needle or other defects.

3. It will not affect the adhesion between the coating layers.

4. With high temperature resistance, it can be used in a wide range of temperature.

5. It can destruct the stability of bubbles in coating.

Storage:

Stored in unopened package at room temperature in a dry, ventilated place .

            Samples                                                              20/25/30kgs                                        180/200/230kgs

  Packing: drums with palletized and shrink wrapped on pallets.